Search

Repair Topics

garage-door-hinge-pic1What does a garage door hinge do? Garage doors are made of panels.You have two options with garage door hinges:

See the article 'Overhead Garage Door Repair' if this is not your problem.

Most residential doors have four panels that are twenty one inches high. To allow the panels to move up and overhead they are connected together with hinges. As the door raises and goes around the bend in the track the hinges hold the panels together.

The hinges on the side of the door provide and additional service. They have a sleeve in them where the garage door rollers go. The hinges are made of metal and can get rusty or even break.

Hinges may start to stick and make noise. This is a fairly simple problem to take care of. Check out the rest of the article for information on what you can do.

Is this something you can do? Yes it is, it's pretty easy.

Garage Door Hinges - Information

What Can You Save?

This is an easy job for a service man. The hinges should cost less than $5 each. A $50 service call plus parts would be the minimum. The danger is that the repairman may take the opportunity to try and sell you a new door. They can be quite convincing when telling you about the woes of your current door. A new door could run into the thousands of dollars. Do you really hate your current door? No, well then just fix it yourself.

How Hard Could It Be?

Repairing or replacing door hinges is not hard at all.

These repairs will have a Difficulty Level of: Simple
These repairs require a Skill Level of: Job Jar Specialist

For and explanation of the terms in this section, see 'How to Use This Site'.

Check the Simple Things!

Lubricating the hinges is very easy. For squeaking or sticking hinges this should solve the problem.

What Can Go Wrong?

Not a whole lot, unless you decide to take all of the hinges off at the same time and your garage door falls apart. Deal with them one at a time and you should not have any trouble.

Troubleshooting Garage Door Hinge Problems

There are only two things to address. The first is lubrication. There is not a lot that can go wrong with a hinge and many times a little oil will fix it. See Step One. The second issue would be replacing a broken, seized or rusted hinge. The new door hinges are less than five dollars each. Replacing one is about a ten minute job. See Step Two for the guidelines

One of the main problems you will have with hinges on a garage door is the lubrication. Rusty or binding hinges can be fixed with a little oil or grease. You can review 'Lubricating Garage Door Hinges' by following this link.

When the hinges are too far gone the only recourse will be to replace them. Garage door hinges are fairly common and not too expensive. The article 'Replacing Garage Door Hinges' discusses what you need to do to make this repair.

>

Summary

So what did you get into? Were you able to oil them and get them working? Or were they too far gone? 

Hopefully you were able to take care of your problem with a little oil. Worst case, you had to replace one or more of the hinges. They were not that expensive and not that hard to find. I know it was not a hard job. In the future you will be prepared to repair other garage door hinges. Well done!

types-of-furnace-filters-pic1Selecting a furnace filter will mean that you have to choose the type that you want. There are different types and ratings as to quality.

Furnace filters are rated by how well they trap particles in the air. The smaller and greater quantity of particles trapped, the better the filter, more or less.

There are different types of filters that you can get. They range from a disposable fiberglass filter to an electronic air cleaner. HEPA filters, the kind used in hospitals are the best at removing allergens and dust. However, the down side is that they restrict the air flow. Most residential furnaces are not equipped for the added resistance.

The question becomes, how concerned with allergens are you? You have to weigh that against cost for your furnace filter replacement project. When allergies are a problem, the extra cost is worth it.

There are some rating systems for furnace filters. The MERV rating (1 to 11, the higher the number the better)is sponsored by the American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE) and is intended for comparison use.

The MPR system uses numbers up to 1250, with the higher numbers being better. Obviously, the better quality filters cost more. For a discussion on all the types of furnace filters, go to 'Types of Furnace Filters'. Find out what you need to know to make a good decision.

Types of Filters

Understanding furnace filter types is important if you have members of your family with health issues. Allergies and respiratory problems are adversely affected by poor air quality. Getting the right type of filter can improve the purity of the air in your home.

There is no question, better filters will cost more. Compared with trips to the doctor the added cost may be insignificant. Add to that the breathing discomfort that you or someone else in your home may experience, and cost pales in importance.

Do you understand the rating systems for furnace filters? See the article 'Understanding Furnace Filter Ratings' for more information. Do you need to know how to replace your furnace filter? See the article 'Furnace Filter Installation' for instructions.

Below you will find listings for some common furnace filter types. Cost needs to be weighed against  a families health concerns when selecting a filter.

Disposable Fiberglass Filters

These types of furnace filters are the least expensive ones to buy. You can probably find one that fits your furnace for a couple of dollars. You can buy a package of 12 for around $20. That sounds great. Well it is if cost is your only concern.

Unfortunately, the lower cost also means lower performance. These types of furnace filters will have MERV ratings between 1 and 4. The do an adequate job of removing dust from the air. For other things like bacteria, mold, pollen and small dust particles, they do a poor job. For homes that have people with allergies, they are not suitable.

Washable Electrostatic Filters

Electrostatic types of furnace filters are generally permanent and can be washed. They work by generating a positive charge that causes the dust to stick to the media. They are more expensive than disposable filters. However, considering that they are permanent the cost savings over the long haul can be significant. This type of furnace filter can be washed out with a hose, allowed to dry an put back in the furnace. The price range for a filter of this kind is between $50 and $200.

Electrostatic furnace filters do not have MERV ratings, because they are not a dry filter media. You will have to rely on information from the manufacturer to determine the performance of the filter.

There are some pleated disposable filters that also generate an electrostatic charge. This is perhaps getting the best of both worlds. These filters boast electrostatic charges for dust particles and quality pleated filter

Pleated Allergy Filters

Pleated allergy types of furnace filters are as the name implies, pleated. The pleating allow for better air flow while still filtering out small particles. These types of filters are good at removing common allergens and fine dust from the air.

This increased performance does not come without cost. This type of filter runs between $5 and $20 each. Most of them are good for three months before they need replacing. For homes that have people with allergies, they are a must.

These types of furnace filters will usually have MERV ratings of between 7 - 9 and MPR ratings of 600 - 1500. They are suitable for residential heating systems.

Electronic Air Cleaners

Electronic air cleaners are another piece of equipment that attaches to your heating and air conditioning system. The are fairly expensive, upwards of $1,500 installed. In addition they require regular maintenance and filter replacement.

The advantages are that they eliminate a higher percentage of contaminants from the air. For those with allergies or other health problems, this peace of mind may be worth the added expense. You have to have an hvac contractor install the system for you, since it has to be integrated with your duct work. Once installed, you can maintain it a replace the filters yourself.

Activated Carbon Filters

The addition of activated carbon to a furnace filter will help with odor control. Cooking, pet or smoke odors can be removed with activated carbon. The activated carbon is added to a pleated filter media that eliminates the other types of particles. These types of furnace filters are a little more expensive than the pleated allergy filters. When odors are a problem, you may not mind the extra expense.

Activated carbon filters can have a MERV rating, similar to other style filters. A rating of 8 should be possible. This is a good rating for a residential heating system.

HEPA Filters

HEPA stands for 'High Efficiency Particulate Air'. These are the best filters you can get for removing small contaminants. The problem is that they seriously restrict the flow of air in your ventilating system. Commercial buildings such as hospitals use this type of filter. They design the hvac systems for the reduced air flow.

There are some pleated allergy filters that claim to be HEPA rated. They may carry a MERV rating of 12. A filter like this will likely be suitable for a residential furnace. When in doubt, check with the manufacturer of your furnace or your furnace maintenance contractor.

types-of-furnace-filters-pic1Furnace filters come in a lot of shapes and sizes. Determining the furnace filter size is the first step in purchasing a new filter.

The quickest way to find the size of your filter is to get it off of the old one. There are a few places your filter could be located.

Up Flow Furnaces

This type is probably the most common. An up flow  furnace as the name implies pushes the warm air up. The filter will be located at the return air portion of the furnace which will be at the bottom. It can be inside of the furnace below the blower or on the side, between the cold air return and the furnace.

Down Flow Furnaces

On a down flow furnace the cold air comes in from the top. The Filter will be above the blower. This type is often an inverted vee that requires two filters.

Horizontal Furnaces

This style is usually located in a crawl space or an attic. The filter will be on one side or the other, again at the return air side. It will likely be the style that slided in to the duct work. There should be a removable cover.

Finding the Size

Furnace filters are sized by width, length and thickness. The size on the filter is usually expressed in inches (example: 16"x20"x1"). A filter that is the wrong size will typically not fit, or may not stay in place, once installed.

The owner's manual for your furnace should tell you what size you need. Don't have your owner's manual? You can try searching online if you know the model number of your furnace. Try Manuals Online to see if you can get a copy of your owner's manual. Or try the manufacturer's website for the furnace that you have.

A low tech method would be to measure the filter that you have in your furnace now. Take out the old filter and measure it. Width, length and thickness, write them down and you're all set.

This article provides information about 'Furnace Filter Installation'. This is a fairly easy maintenance and repair activity that you can perform yourself in just a few minutes. Of course you will need to have the correct furnace filtter on hand before you begin.

There are a few considerations begore you begin. (1) 'Determining Funace Filter Size' covers getting the size right. (2) 'Types of Furnace Filters' helps you select the right one for your situation.

Reasons for Installing Furnace Filters

Forced air furnaces circulate warm air through your home. Houses with central air conditioning also use the furnace to distribute cool air. When the air circulates, it picks up dust and other particulate that is not good for you. The filter catches the dust and keeps it from going back into your home.

How well your furnace filter performs will depend on several factors. The first and foremost concern is the health of your family. Allergies, respiratory problems and other breathing disorders can make the concern about your furnace filter acute. Not only do you want to replace the filter regularly, you also want to replace it with the right type. You should review the articles 'Types of Furnace Filters' and 'Furnace Filter Ratings' if you have health concerns.

This process works pretty well as long as the filter is changed regularly. A clogged filter will restrict the amount of air that can pass through it. This makes your furnace work harder to push the air. In addition, some of the dust and germs will get back into the system. Don't despair, filters are cheap and easy to change.

Furnace Filter Installation - Information

What Can You Save? - Getting someone out to your home is the expensive part. Likely $50 to $75 just for the service call. Furnace filters can vary in price dramatically. From just a few dollars on up to fifty or more dollars. The cost of a furnace filter replacement goes up dramatically when you get a HEPA style filter.

How Hard Could It Be? - A furnace filter replacement project is not hard at all. A few minutes and it's all done. These repairs will have a Difficulty Level of: Easy. These repairs require a Skill Level of: Total Novice. For and explanation of the terms in this section, see 'How to Use This Site'.

Check the Simple Things! - Replacing a furnace filter is pretty simple already. Some types can be cleaned, thus saving the cost of a new filter.

What Can Go Wrong? - Furnace filters trap dust and other pollutants in the fibers. Use caution when removing a dirty filter. You don't want to spread the dirt everywhere. Regular replacement is important. The longer a filter stays in place the more dirt it will collect. They become unhealthy when neglected.

Furnace Filter Replacement – The Steps Involved

The first thing you need to know when you replace your filter is the size. 'Determining Furnace Filter Size' covered how to locate the size of your filter.

The type of furnace filter you buy also matters. The article 'Selecting a Furnace Filter Type' talked about what your choices might be and where to go for more information.

Removing a Furnace Filter

furnace-filter-replacement-pic3Removing a dirty furnace filter is probably not your first choice for things to do. The old filter can be quite dusty.

If you have allergies or are bothered by dust, you will want to wear a dust mask. A dirty filter can contain dust, bacteria and viruses that have been airborne in your home.

Begin you furnace filter replacement by locating your old filter. The furnace filter is located between the return air duct and the blower. This can be inside the furnace or in the duct work next to the furnace. See the article 'Determing Furnace Filter Size' for more information on locating the filter.

 You will have a cover plate that can be removed to get at the filter. This may be held in place by screws or some other retaining system.

A filter that is located on the side will likely have a door of some sort. When the door is open the filter will slide out to remove it.

Remove the cover plate to expose the old filter. It should have retaining springs or clips that hold it in place. Remove the springs and slide the old filter out.

Have a plastic bag handy to keep the dust from getting airborne again. Dispose of the old filter. Use a vacuum to remove any residual dust before you install the new filter.

Installing a Furnace Filter

furnace-filter-replacement-pic4Installing a new furnace filter is easy once you have removed the old one. See the information on removing an old filter if you haven't taken the old one out yet

This is fairly simple, but there are mistakes you can make with a furnace filter replacement. Most filters have wire retainers that hold the medium in place. The wire retainers should be facing the blower.

Look on the side of the filter for an air flow arrow. This will indicate the correct way to turn the filter. The air will move from the cold air duct into the furnace. When the filter is inside and on the bottom of the furnace it will be coming from the bottom up.

 With the old filter out, put the new filter in with the arrow turned the proper way. The arrow should be pointed toward the blower.

On an up flow furnace, the blower is located at the bottom of the furnace. On a downflow furnace it will be located at the top of the furnace. For a horizontal furnace, it will be on one side or the other.

Unpack the filter and install it with the wire turned the right way. Put the retaining springs or clips back in place. Put the cover plate back on. That's all there is to a furnace filter replacement, pretty simple.

Furnace Filter Maintenance

Furnace filter maintenance means changing your filters regularly. There are both cost and health issues to be concerned with.

The recommended length of time between furnace filter replacements varies with who you talk to. Some will suggest as often as once a month. The longest possible duration would be annually.

The quality of the filter has a bearing on this. Cheaper filters will need to be changed more often.

For $5 or $6 you can get a pleated filter with a decent rating that will last for three months. This is the duration most often recommended. From a practicality and cost standpoint it seems reasonable.

Waiting longer than three months is not a good idea. A dirty filter will make your furnace work harder and will affect your families health. Filters are often sold in bulk packs and you can get a years supply in one trip.

Take ten minutes every three months and engage in a rewarding furnace filter replacement project. You will enjoy that deep breath you are able to take afterwards.

Summary

Did you learn everything you wanted to about a furnace filter replacement project? Not much to it, but it is an important maintenance item. Keeping up with this on a regular basis will save you in furnace repairs later.

The other important reward is your families health. Fewer trips to the doctor will make everyone happy. Stocking up on furnace filters even makes this an easier repair. Just remember when the weather changes, to change the filter.

fix-a-running-toilet-pic3

There are three reasons for adjusting toilet tank water levels. The first is a water level that is too high. When this happens the water can run over the top of the fill tube and down into the toilet bowl. Not only is this annoying, it also wastes water.

Not sure if the water level is the problem with your toilet? See the article 'Troubleshooting Toilet Problems' for a complete listing of all the toilet issues and the resources to solve the problems.

A second reason is having enough water for the toilet to flush properly. Toilets use water to create a siphon that removes waste and cleans the bowl. When too little water flows into the bowl, a weak or no siphon is created.

If you need to adjust the water level in your toilet tank, you want to see the article 'How To Adjust a Toilet Float'. Toilets can have different types of floats, this article will explain that.

A third reason would be to try and reduce the amount of water you use. This is probably a bad idea, given the above. You may be able to lower the water level slightly with no adverse affects.

Lowering the Water Level for a Running Toilet

You have two key components inside of your toilet. One is the toilet fill valve and the other is the flush valve. The fill valve allows water to enter into the tank and controls the amount of water inside the tank. The float is attached to the fill vavle.

The other component is the flush valve. It has a large opening at the bottom that releases water inside of the tank, so that the toilet can flush. The flush valve has a cylindical tube with an open top.

When the water level is too high, it spills over the top of the flush valve tube and spills into the toilet bowl. This wastes water and makes an irritating noise. Lowering the water level until it is just below the top of the flush valve will stop this problem.

See the article on 'adjusting a toilet float or ball cock' for more information and instructions on what to do.

Toilet Fill Valve Not Working

You adjusted the float and the toilet is still running. If it runs constantly, the fill valve is bad and needs to be replaced. You will need to obtain a fill valve kit and replace the valve.

See the article on 'Replacing a Toilet Fill Valve'. Follow this link to fix a running toilet that needs a new fill valve.  

Slow Flushing Toilet

For a slow flushing toilet, the problem is a water level that is too low. Toilets need the correct amount of water to operate. If the water level is too low the toilet will flush slowly, sometimes poorly or not at all.

A slow flushing toile is prone to clogging up, which is another messy problem that it is best to avoid. See the article, 'Fixing a Slow Flushing Toilet' for more information.

Reducing Your Water Usage

If you are adjusting the water level on your toilet to reduce the amount of water you use, you may want to consider other options. Lowering the water level in the tank will likely cause other problems that will be more costly than the water.

Toilets are designed to operate with a certain amount of water. This could be as much as 7 gallons per flush or as low as 1.28 (sse below) gallons per flush. If you have an older toilet, you could be wasting a lot of water with each flush. The solution would be to replace the toilet with one that uses less water, see 'Installing a New Toilet' for information on what is involved.

How Much Water Does My Toilet Use?

There have been different regulations put in place over time that govern the amount of water a toilet can use. Below you can see how the amount of water that toilets use has been drastically reduced over time.

Prior to 1982:        5 - 7 Gallons
1982 - 1990:        3.5 Gallons
1990 - 1994:        1.6 - 3.5
1994 - Present:        1.6 Gallons (Required by Law)
2005 - Present:        1.28 - 1.6 Gallons (The 1.28 gallons per flush is available, but not required)

To save water, you want to check and see how many gallons of water your current toilet is using. There might be a lable on the top of the base, just in front of the tank that tells you the gallons per flush.

If there isn't, look inside the tank to find out the manufacture date for the toilet. You can compare that date with the information above to see how much water you are using.

Some of the years had a range for the gallons per flush, so you can't be certain about those years. The only way to be sure is to measure the amount of water the toilet is using.

How To Measure Water Usage In a Toilet

It is a fairly simple process to measure the amount of water a toilet uses. The steps are listed below:

(1) Use a piece of masking tape to mark the water level in both the tank and the bowl of the toilet.
(2) Shut off the water supply to the toilet.
(3) Flush the toilet as you normally would.
(4) Use one quart or two quart measuring pitcher to refill the toilet tank and the bowl up to the marks.
(5) Add up the total number of quarts it takes to fill the toilet. Ideally, it should be a little over six quarts.

Thats all there is to it. If you have a toilet that uses more than three gallons of water per flush, you may want to consider replacing it with one that is more efficient. See the article 'Replacing a Toilet' for information on how difficult it is.

Adjusting the Toilet Tank Water Level

There are different kinds of floats that are used to control the fill valve. The article 'How To Adjust the Float on a Toilet' discusses how to adjust the various types.

Once you have adjusted the water level, flush the toilet a couple of times and make sure it is filling to the proper level. Most toilets have a fill line marked on the side of the tank, if not, the top of the flush valve is the mark. Is it filling to the proper level? Yes, you have completed a successful toilet repair.

Go to top